DIYnot
Local | Network
   DIYnot > Forums
Local | Network
DIYnot Network Local DIYnot Network Local  
  Forum IndexForum Index     RulesRules    HelpHelp     Join FREERegister Free     About CookiesCookies     SearchSearch     LoginLogin 

Hyundia Atoz


 
Post new topic   Reply to topic    DIYnot.com Forum Index > Car Repairs / Maintenance
Search this topic :: View previous topic :: View next topic  
Author Message
davidstanton

from United Kingdom

Joined: 12 Mar 2005
Posts: 19
Location: United Kingdom

PostPosted: Tue Mar 15, 2005 10:51 am Reply with quote

Hi

Can anyone provide me with technical service data (gaps, timing, etc etc) for the Hyundai Atoz.

Thanks
Back to top
 Alert Moderators

If you do not want to see this advert, click here to login or if you are new click here to join free.
jonnyfishing

from United Kingdom

Joined: 28 Feb 2005
Posts: 587
Location: Manchester,
United Kingdom
Thanked: 27 times

PostPosted: Tue Mar 15, 2005 10:16 pm Reply with quote

Settings for HYUNDAI ATOS AMICA 1.0i 1998-2004. eng.code G4HC as requested......

IGNITION TIMING=9 DEGREES @900rpm
IDLE SPEED AND C.O. IS NOT ADJUSTABLE.
SPARK PLUGS=NGK-BKR5ES-11.....GAP=1.0-1.1
VALVE CLEARANCE (HOT)=0.20mm INLET
(HOT)=0.25mm EXHAUST

ENGINE OIL=10W/40 SJ/A2-96..................... 3.1 LITRES WITH FILTER
MANUAL GEARBOX OIL=SAE 75W/85W ......... 2.2 LITRES
AUTO.FLUID= HYUNDAI ATF.......................... 4.0 LITRES

HOPE THIS HELPS YOU OUT...IF YOU NEED ANY MORE INFO.JUST ASK.

icon_eek.gif icon_eek.gif icon_eek.gif
Back to top
The following user says thank you to jonnyfishing for this useful post:
Brudan (28 Apr 2011)
 Alert Moderators
davidstanton

from United Kingdom

Joined: 12 Mar 2005
Posts: 19
Location: United Kingdom

PostPosted: Tue Mar 15, 2005 11:05 pm Reply with quote

Thanks. Alot cheaper than the 240 that Hyundai want for the workshop manuals!!
Back to top
 Alert Moderators
Davatos

from Malta

Joined: 05 May 2005
Posts: 1
Location: Malta

PostPosted: Thu May 05, 2005 12:34 pm Reply with quote

Hi Davidsanton,

I have been searching for a workshop / repair manual for the Hyundai Atos 2002 model for quite a long time but to no avail.

The local agents in Malta for Hyundai refused to sell it to me and the Hyundai mothercompany didn't even bother to reply my mail.

At least you got a quote of the cost of the manual.

I still need to obtain this manual. Did you manage to find a cheaper repair manual for this vehicle?

Thanks also to jonnyfishing. His tehnical data is has been taken note of.

Thanks

Dav
Back to top
 Alert Moderators
davidstanton

from United Kingdom

Joined: 12 Mar 2005
Posts: 19
Location: United Kingdom

PostPosted: Thu May 05, 2005 12:47 pm Reply with quote

Hi

No I didn't manage to find another manual.

David
Back to top
 Alert Moderators
Brudan

from South Africa

Joined: 28 Apr 2011
Posts: 1
Location: South Africa

PostPosted: Thu Apr 28, 2011 8:37 pm Reply with quote

Does any one know if the following settings will work for a Hyundai Atoz Prime 2005-6?

Settings for HYUNDAI ATOS AMICA 1.0i 1998-2004. eng.code G4HC as requested......

IGNITION TIMING=9 DEGREES @900rpm
IDLE SPEED AND C.O. IS NOT ADJUSTABLE.
SPARK PLUGS=NGK-BKR5ES-11.....GAP=1.0-1.1
VALVE CLEARANCE (HOT)=0.20mm INLET
(HOT)=0.25mm EXHAUST

ENGINE OIL=10W/40 SJ/A2-96..................... 3.1 LITRES WITH FILTER
MANUAL GEARBOX OIL=SAE 75W/85W ......... 2.2 LITRES
AUTO.FLUID= HYUNDAI ATF.......................... 4.0 LITRES

Read more: http://www.diynot.com/forums/viewtopic.php?t=22744#ixzz1KqtUsUS2
Back to top
 Alert Moderators
jonnyfishing

from United Kingdom

Joined: 28 Feb 2005
Posts: 587
Location: Manchester,
United Kingdom
Thanked: 27 times

PostPosted: Fri Apr 29, 2011 11:03 am Reply with quote

See if you can find what you are looking for here:- www.carfolio.com/specifications/models/car/?car=127743


icon_wink.gif
Back to top
 Alert Moderators
goldfever1

from United Kingdom

Joined: 01 Apr 2012
Posts: 7
Location: Yorkshire,
United Kingdom

PostPosted: Sun Apr 01, 2012 9:03 pm Reply with quote

jonnyfishing wrote:
Settings for HYUNDAI ATOS AMICA 1.0i 1998-2004. eng.code G4HC as requested......

IGNITION TIMING=9 DEGREES @900rpm
IDLE SPEED AND C.O. IS NOT ADJUSTABLE.
SPARK PLUGS=NGK-BKR5ES-11.....GAP=1.0-1.1
VALVE CLEARANCE (HOT)=0.20mm INLET
(HOT)=0.25mm EXHAUST

ENGINE OIL=10W/40 SJ/A2-96..................... 3.1 LITRES WITH FILTER
MANUAL GEARBOX OIL=SAE 75W/85W ......... 2.2 LITRES
AUTO.FLUID= HYUNDAI ATF.......................... 4.0 LITRES

HOPE THIS HELPS YOU OUT...IF YOU NEED ANY MORE INFO.JUST ASK.

icon_eek.gif icon_eek.gif icon_eek.gif
Back to top
 Alert Moderators
Arthur2shedsJackson

from United Kingdom

Joined: 12 Aug 2011
Posts: 258
Location: Lancashire,
United Kingdom
Thanked: 16 times

PostPosted: Wed Apr 04, 2012 12:57 pm Reply with quote

goldfever1 wrote:
jonnyfishing wrote:
Settings for HYUNDAI ATOS AMICA 1.0i 1998-2004. eng.code G4HC as requested......

IGNITION TIMING=9 DEGREES @900rpm
IDLE SPEED AND C.O. IS NOT ADJUSTABLE.
SPARK PLUGS=NGK-BKR5ES-11.....GAP=1.0-1.1
VALVE CLEARANCE (HOT)=0.20mm INLET
(HOT)=0.25mm EXHAUST

ENGINE OIL=10W/40 SJ/A2-96..................... 3.1 LITRES WITH FILTER
MANUAL GEARBOX OIL=SAE 75W/85W ......... 2.2 LITRES
AUTO.FLUID= HYUNDAI ATF.......................... 4.0 LITRES

HOPE THIS HELPS YOU OUT...IF YOU NEED ANY MORE INFO.JUST ASK.

icon_eek.gif icon_eek.gif icon_eek.gif



And your point gf1 was ???
Back to top
 Alert Moderators
goldfever1

from United Kingdom

Joined: 01 Apr 2012
Posts: 7
Location: Yorkshire,
United Kingdom

PostPosted: Wed Apr 04, 2012 9:00 pm Reply with quote

is the valves hydraulic on the 1998/99 atoz are these not adjustable ?
that is what i was asking, as i had to tke off all drive belts not the timing belt to replace a timing cover and changed all fluids oil included and put everything back together and now it sounds like a diesel makes a right racket,took of rocker cover and everything was as dry as a bone looks like no oil reaching tappets so thought these might want checking but are they adjustable or not ? but gonna get oil round first and then look into the rocker cover again if it still sounds like a diesel lol sorry guys i only a female who likes gettin her hands dirty lol ty ev1 icon_lol.gif
Back to top
 Alert Moderators
Arthur2shedsJackson

from United Kingdom

Joined: 12 Aug 2011
Posts: 258
Location: Lancashire,
United Kingdom
Thanked: 16 times

PostPosted: Sat Apr 07, 2012 8:27 pm Reply with quote

Have no experience of the Hyundai Atoz, but try this website for an answer

http://www.justanswer.com/sip/hyundai-vehicles?r=ppc|ms|3|Rest+of+World|Hyundai&JPRC=1&JPKD=8874612495&JPDC=p&JPAD=815116094&JPKW=on%20Hyundai&JPRQ=are%20valves%20hydraulic%20on%20the%20hyundai%20atoz%3F&JPAF=txt&JPCD=20120207

It seems unusual that the noise should develop after work, particularly since you changed the oil, because the top of the engine shouldn't be dry after you've just topped up the oil. Quite the opposite really.
Did the oil light go out when you stsrted it?
Back to top
 Alert Moderators
goldfever1

from United Kingdom

Joined: 01 Apr 2012
Posts: 7
Location: Yorkshire,
United Kingdom

PostPosted: Sat Apr 07, 2012 10:16 pm Reply with quote

did not notice the oil light,but as the weather has been quite bad not been able to progress with the car but will start again in the moning ie sunday
so will keep you updated as to my results thankyou. icon_smile.gif
Back to top
 Alert Moderators
goldfever1

from United Kingdom

Joined: 01 Apr 2012
Posts: 7
Location: Yorkshire,
United Kingdom

PostPosted: Wed Apr 11, 2012 7:41 pm Reply with quote

goldfever1 wrote:
did not notice the oil light,but as the weather has been quite bad not been able to progress with the car but will start again in the moning ie sunday
so will keep you updated as to my results thankyou. icon_smile.gif


right we have fixed the noisey engine whic is now purring not growling like a diesel lol we took off the rocker cover and did all valves inlet and gas now perfect so quiet had all new oil plus fluids changed also. now the problem i have is not with the engine Its the drive belts or pulleys that is making a noise souds like a dry pump noise sort of soft rubbing also not a clue what it could be sound seems to get louder as the engine heats up ! not there on initial start up !! left it running to see if fan kicked in and yes it did so any ideas guys thankyou. icon_confused.gif
Back to top
 Alert Moderators
Arthur2shedsJackson

from United Kingdom

Joined: 12 Aug 2011
Posts: 258
Location: Lancashire,
United Kingdom
Thanked: 16 times

PostPosted: Wed Apr 11, 2012 8:11 pm Reply with quote

Belt too tight, not tight enough ?
Back to top
 Alert Moderators
goldfever1

from United Kingdom

Joined: 01 Apr 2012
Posts: 7
Location: Yorkshire,
United Kingdom

PostPosted: Wed Apr 11, 2012 8:24 pm Reply with quote

Arthur2shedsJackson wrote:
Belt too tight, not tight enough ?


Thankyou will take a look at that in the morning icon_biggrin.gif
Back to top
 Alert Moderators
Search this topic :: View previous topic :: View next topic  
Post new topic   Reply to topic    DIYnot.com Forum Index > Car Repairs / Maintenance All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Similar Topics   Replies   Views   Posted 
Hyundia Atoz Gearbox conversion 3 620 Wed Nov 09, 2005 10:57 am
Hyundai 1999 Atoz air bag light 9 200 Sun Jun 23, 2013 7:14 pm


 
DIYnot
Find an Expert | Find a Supplier | Search DIYnot.com
Network | Advertising | Newsletter
DIY | DIY How To | @home | DIY Wiki | DIY Forum
By using this site you agree to our Terms of Service / Disclaimer.
Please read our Privacy Policy. Copyright © 2000-2014 DIYnot Limited.