I have just purchased a beko washing machine 1600 spinmodel no.WMA 765 S PURCASED FROM EBAY AS A GRADED MACHINE ARRIVED WITH NO TRANSIT BOLTS,WORKED FOR COUPLE OF DAYS THEN WOULD NOT SPIN,TOOK OFF BACK,BELT HAS COME OFF,HOW DO I PUT IT BACK ON,CANT SEE TENSIONER,DOES IT HAVE ONE.HELP!!!!!!
BEKO W/MACHINE BELT
- Thread starter daver1962
- Start date
Sponsored Links
dont no about your washing machine but some dont have a tensioner, those type the belt stretches onto the pullys, have a look at how the motor is attached and see if it slides,if not put belt on the motor pully then feed it round other pully watch your fingers...
- Joined
- 2 Apr 2006
- Messages
- 1,896
- Reaction score
- 29
- Country
Your machine has a stretch belt.
Put it around the motor pulley and cable tie it to the drum pulley. Rotate the drum from the inside of the machine and it should go on with no problems.
Put it around the motor pulley and cable tie it to the drum pulley. Rotate the drum from the inside of the machine and it should go on with no problems.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
