Baxi 60/100 system boiler

jakefouro · 4 Oct 2006

Hi All,

Have an 18 month oild baxi 60/100 system boiler - at the moment it will not ignite - flashing warning symbol indicates "low pressure or pump fault". Pressure ok and pump running. Manual fault finding chart suggests possible damaged primary flow valve diaphragm damaged or flow valve rod obstructed. Any ideas?

Baxmax · 4 Oct 2006

Does pump run

If yes does push rod on hydraulic differential activate switch

If no push rod is seized if yes switch is broken :

jakefouro · 4 Oct 2006

Thanks for that - pump is running - will check out your suggestions tomorrow.

jakefouro · 5 Oct 2006

Thanks Baxmax! Took the differential valve apart and alot of grit behind the rubber diaphragm. Cleaned it up, put it back together and it lit up first time after re pressurising.

Must now find out why I have so much grit and dirt in the system.

Regards Ger.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Baxi 60/100 system boiler

jakefouro

Baxmax

jakefouro

jakefouro

DIYnot Local

Similar threads