Adding a bend to a soil stack

Thanks Slug After you suggested that the outlet pipe might be extended in the drawing in order to show the dimensions and height I emailed the (ebay) seller to check this and they replied: "ITS NOT ALL THE WAY TO THE WALL. IT WILL ALLOW A PIPE AND MORE OR ELSE BE FLUSH"

Hooray!! I think I'll go for it!

Much better than paying extra for a builder/plumber to mess about with the stack.

What is the relevance of the "70" dimension "300" along the base shown on the drawing?

Is this an option for downward connection - i.e. through the floor?

Click to expand...

I wondered that too IJWS15, but when I enquired about the outlet pipe and explained my problem to the seller he didn't mention this. However it would be in completely the wrong position if it was for a downward connection! Way too far into the room. Maybe it shows the position of the screw holes

Cheers everyone.

id say centre line of screw holes and how much play u have with them for movement of screwing to the floor inside the pan.

dan the man said:

id say centre line of screw holes and how much play u have with them for movement of screwing to the floor inside the pan.

Click to expand...

You took the words out of my er 'keyboard'

The 70 mm represents the fixing which is a plastic angle bracket. The vertical part of which has probably about 30 'hit and miss' holes that you use to secure the pot with horizontally positioned screws.