405 immobiliser problem
- Thread starter 405 lover
- Start date
Sponsored Links
Have you tried inserting key in ignition turning it to position 1 then pressing the fob button?
A similar method is used to re-synchronise BMW key fobs.
Wotan
Do you have the pin number keypad in the box between the seats?
If so then the ribbon cable was a favourite to fail !
You MIGHT get it to start if you power the fuel solenoid seperately directly off the battery if you need to move it.
Tony
If so then the ribbon cable was a favourite to fail !
You MIGHT get it to start if you power the fuel solenoid seperately directly off the battery if you need to move it.
Tony
Sponsored Links
Do you have the pin number keypad in the box between the seats?
If not then I would have expected the alarm to be sounding???
If it does not respond to the IR key fob code then there is a very simple operation but I cannot publically post it otherwise Mad Mod 10 will delete it as "inappropriate security advice" !!!
Tony
If not then I would have expected the alarm to be sounding???
If it does not respond to the IR key fob code then there is a very simple operation but I cannot publically post it otherwise Mad Mod 10 will delete it as "inappropriate security advice" !!!
Tony
