Hi
Any advice for a potterton boiler that cuts out after about ten minutes, waits for a couple of minutes then re-fires and the cycle goes on and on. Rads and water warming nicely but cooling off between firings This system has been stood still for the best part of a year.
Beyond that, a shower with hot and cold feeds remains cold regardless of water temperature in the tank when the immersion heater is being used ( as an alternative to the intermittent boiler)
any insight would be graciously received
cheers
Any advice for a potterton boiler that cuts out after about ten minutes, waits for a couple of minutes then re-fires and the cycle goes on and on. Rads and water warming nicely but cooling off between firings This system has been stood still for the best part of a year.
Beyond that, a shower with hot and cold feeds remains cold regardless of water temperature in the tank when the immersion heater is being used ( as an alternative to the intermittent boiler)
any insight would be graciously received
cheers