- Joined
- 22 Jan 2007
- Messages
- 8,305
- Reaction score
- 4,129
- Country
Hi, Tring to sort my mates door handle for him cos I thought it was the same as last time (loose bit on the handle its self) but it looks more complicated.
Problems is, Door locks and unlocks fine, but on pulling the handle down the (dunno the name of it) catch bit that should pull in when the handle turns only moves in a little (not enough to open the door)
Took the handle off and the square shaped bolt that goes from outside handle to inside is moving fine so must be something right inside the handle/lock.
Can anyone shed some light on the most likely cause and if its a repair or replace parts job?
thanks
SGM
Problems is, Door locks and unlocks fine, but on pulling the handle down the (dunno the name of it) catch bit that should pull in when the handle turns only moves in a little (not enough to open the door)
Took the handle off and the square shaped bolt that goes from outside handle to inside is moving fine so must be something right inside the handle/lock.
Can anyone shed some light on the most likely cause and if its a repair or replace parts job?
thanks
SGM