Ford Focus, year 2000 - Immobilizer Reprogramme

Joined
4 Jan 2011
Messages
9
Reaction score
0
Location
Kent
Country
United Kingdom
Hi all,
Does anybody have the instructions of how to reprogramme the immobilizer when there is a new key.

I have the two keys as people have suggested, I just need the instructions of how to go about reprogramming etc.

Regards
Mike
 
Sponsored Links
try this



With the key in the ignition, turn the ignition on to the 1 position, then off and then again three times, then once more and leave it at I. A beep will sound showing that the system is set to program.

Now press the unlock button on the remote. Press the unlock button on any other remotes that you have to program at the same time.

Now turn the ignition off. A beep will sound indicating that program mode is finished.
 
Hi
You have described the sequence for how to programme the remote locking.

I need the instructions of how to programme the immobilizer using the two keys

Mike
 
Sponsored Links
I have the original key that has the 3 remote buttons and the manual key without remote locking buttons (it has a blue chip)

mike
 
thanks, thats what im looking for.

the guide says about using 3 keys, but i only have 2 and want to reprogramme my remote key
 
If you want to reprogramme the remote use the fisrt link if you want to reprogramme a new un programmed transponder key use link 2
 
Sponsored Links
Back
Top