Hi the main filter suppressor on my smeg dishwasher, DWF 409 SS, has burnt out. I have a new suppressor but stupidly didnt make note of the position of the 4 colours of wires that need to be re-connected. Please advise. Thanks
SMEG Dishwasher DWF409SS-changing the main filter supprossor
- Thread starter ukspacecadet
- Start date
Sponsored Links
Hi
there is a schematic but no colour guide.
When looking at the cables, it looks like the brown cable and blue cable reach the live side and the red cable and white cable reach the neutral side. I thought that blue was neutral though.
If the above combination is correct, does it matter which spade connetor they go in to as long as its the correct side
thanks
there is a schematic but no colour guide.
When looking at the cables, it looks like the brown cable and blue cable reach the live side and the red cable and white cable reach the neutral side. I thought that blue was neutral though.
If the above combination is correct, does it matter which spade connetor they go in to as long as its the correct side
thanks
Sponsored Links
A suppressor is just a filter, it is only there to prevent radio interference. It has a live in & a live out...neutral in & neutral out.
Follow the mains cable. Brown is L...Blue is N. These two go to the L & N terminals on the suppressor. The 2 leftover leads go to the remaining terminals.
Follow the mains cable. Brown is L...Blue is N. These two go to the L & N terminals on the suppressor. The 2 leftover leads go to the remaining terminals.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
