lenallen

Joined: 12 Feb 2006 Posts: 12 Location: Cambridgeshire, United Kingdom Thanked: 0 times
|
|
JPC

Joined: 10 Aug 2004 Posts: 1409 Location: Leicester, United Kingdom Thanked: 0 times
|
Posted: Sun Feb 12, 2006 11:46 am Post Subject: |
 |
|
on some u turn the outer edge bit
on others u have to take out the pushdown button/s and inside u'll find a flat screw head __________________ Jamie |
|
ChrisR

Joined: 24 Jul 2003 Posts: 18661 Location: London, United Kingdom Thanked: 62 times
|
Posted: Sun Feb 12, 2006 12:08 pm Post Subject: |
 |
|
Push down one half the button and you'll see an undercut in the other to pull it up with a screwwdriver. |
|
lenallen

Joined: 12 Feb 2006 Posts: 12 Location: Cambridgeshire, United Kingdom Thanked: 0 times
|
Posted: Sun Feb 12, 2006 12:12 pm Post Subject: rocca centre flush systern |
 |
|
SPOT-ON MANY THANKS |
|
rustynails

Joined: 17 Mar 2006 Posts: 14 Location: United Kingdom Thanked: 0 times
|
Posted: Fri Mar 17, 2006 12:28 pm Post Subject: how to remove the cistern cover on a roca toilet |
 |
|
lenallen,
On the Roca cistern, you will have a central push button surrounded by what looks like a chrome ring. Lever the push button upwards (being careful not to try bending it too much as it is held in place by a fragile looking plastic pin). Once removed you then put thumb down inside and grip chrome sleeve and unscrew. It will take quite a lot of turns (why I really don't know) before the sleeve comes out. Once removed then you can lift the ceramic lid off. |
|