nas69

Joined: 07 May 2006 Posts: 3 Location: Liverpool, United Kingdom
|
Posted: Sun May 07, 2006 8:19 pm |
|
|
Is it advisable to remove the existing vinyl tiles before laying ceramic tiles? The floor is concrete under the vinyl. If so do i need to prepare the concrete before laying the ceramic tiles i.e. sealing? |
|
warehouseman

Joined: 10 May 2006 Posts: 69 Location: Kent, United Kingdom
|
Posted: Wed May 10, 2006 8:23 pm |
|
|
If the vinyl tiles are of the 'marley' type ie about a foot square, thin , and well stuck down, there is little point pulling them up, as there will be a horrible black bitumin texture underneath. Simply ensure they are sound, clean & then PVA the whole surface. Then use a one part flexible adhesive to lay the tiles. If the vinyl is loose or one of those soft luxury style stuff, then i recommend pulling it up (unless you use the very expensive extra flexible adhesive solutions provided by Bal or Granfix)
If pulling up, Brush concrete with PVA & use Standard Fast set adhesive |
|
Geordie69

Joined: 06 Jan 2007 Posts: 8 Location: Tyne and Wear, United Kingdom
|
Posted: Sat Jan 20, 2007 8:35 pm |
|
|
________________________________
lynda, moderator
please note forum rule 20
I could not split your post and still have it make sense |
|