I have recently had my bathroom re fitted. i have kept the existing show which is a Mira 415 fitted to a combi boiler. before i had the bathroom re fitted the shower was working fine and now I find since he has re sited it (only 6 inches for the original spot) I cannot regulate the shower as I used to. Now it is either too hot or freezing. it also takes ages now to fire up and I end up having to turn the heating system on to get it warm.
The water pressure is fine and I have the boiler set between 1.00 and 1.5 bar as reccommended.I have spoken to the plumber who sorted the bathroom but all he suggested is that I turn down the hot water valve supply whilst leavingbthe cold one fully on.
I have tried this but there has been very little if no change.
What can I do?
The water pressure is fine and I have the boiler set between 1.00 and 1.5 bar as reccommended.I have spoken to the plumber who sorted the bathroom but all he suggested is that I turn down the hot water valve supply whilst leavingbthe cold one fully on.
I have tried this but there has been very little if no change.
What can I do?