Fused connector?

Parcystrade · 8 Apr 2007

I recently bought a easi boost2 shower pump - and I'm a bit wary of fusing- it states on the box \\\"needs only to be connected to a 13amp fused spur\\\" and yet inside the manual \\\" must be connected to a 230 volt ac supply, fused at 3 amps i've hard wired it to a fused spur -switched fused isolator but have not fitted which fuse.

Steve · 8 Apr 2007

use a 3 amp fuse.

The FCU is rated at 13 amps, but you can fit a lower rated fuse. thats what the manual is getting at.

Parcystrade · 8 Apr 2007

Crafty said:
use a 3 amp fuse.

The FCU is rated at 13 amps, but you can fit a lower rated fuse. thats what the manual is getting at.

Cool and with hope.

finks · 9 Apr 2007

__________________________________
lynda, moderator

please see forum rule 20

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Fused connector?

Parcystrade

Steve

Parcystrade

finks

DIYnot Local

Similar threads