Exhibition stand

[Aali]

Hi,
I am building an L shape exhibition stand, the stand is 3 X4.
Will join 4 panels of plywood on one side and 3 panels on the other side.
The stand will have 4 interactive screens 2 on each wall.

How to join the wood panels to the floor( plywood floors)?
and how to join the walls together so they are stable( because people will be using the screens).
Also how to join them and be able to assemble and dismantle the panels to use the stand in future events.

Wall panels will be covered with other material.
Pics attached.
Thanks

View media item 79882 View media item 79882

 

[foxhole]

Extend all vertical timber [assume they will be 3x2 or 2x4] beyond the base of the wall panels and slot into suitable holes in the base . A few timber lock screws will keep them in place and allow rapid disassembly.The wall panels can be clipped into place using either keku clips or mabe Z clips.

http://www.rigidized.com/attachment.php

https://www.google.co.uk/search?q=k...tAq_e7Ab10IHgCQ&ved=0CFYQsAQ&biw=1680&bih=838

 

[Norcon]

Is the plywood stood vertical?
Because that would make the stand 4.8m x 3.6m.

What is the box in the corner for?

Six sheets will make the floor nailed to 3x2".
Then the sides screwed on.

 

[tomfe]

You might want to check the assess statement for your event, it may state you are not allowed to have a raised deck for wheel chair access.
The L shape wall should stand on it's own if it has some form of outrigger on the back.