hi, I don't mind at all if contact me. it could be a few things, the dhw temp sensor is one but you would need to check a couple of other things as well. I be happy to have a look at it if you want. my email is nabbauk@hotmail.com
I'm having problems with my 3 year old Heatline C24 boiler. It keeps on switching off and I have to reset it to get it operational again! I've had a corgi plumber look at it and he has replaced the PCB and the ionisation electrodes and the other two probes. Now the boiler sparks but does not fire-up. It will very occasionally fire-up when I turn the hot water tap on, but it will not fire-up for the CH. The plumber has now said that we need a new gas valve. Does this sound right to you? We're probably going to end up spending as much as the cost of a new boiler!
mehran, i hope you don't mind me contacting you like this but i have a problem with a vizo boiler and you seem to be a good guy to ask about it, i live in Middlesbrough and it seems you are or where a service engineer for heat line so if you have any advice i would appreciate it. the problem i have is that the boiler shuts down every time i turn a tap on, it will run for a few seconds and then shut down, no fault lights or anything, after a little while when it has cooled down a bit it then re lights and runs for a few seconds then off again,
i would presume it it a thermostat ore temp sensor fault but need to know for definate and how i can fix it please,
sorry for the contact again and hope to hear from you soon
mehran, Thank you very much for your very helpful reply. I finally decided not to take any chances and called a boiler engineer to sort it all out, boiler is now up and running. But your kind help is very much appreciated. Good to know there are people out there willing to help.
View mehran's Friends
View mehran's Posts
Alert Moderator
