Hi pal my diplomat ADT8322 keeps flashing and bleeping can you help by any chance already read about cleaning the filter but no good please help a woman in distress
hi sleepy u seem to be a bit of an expert on washers so here goes haha. i have a whirlpool awz 410 stopped spinning, belt stil on after taking back off machine, very tight and looks fine, is there any other reason why the washer would just stop spinning? thanks in advance for your help . Katie
any help would be greatful, i have whirlpool adp7966 and now have fault light flashing 2secs on and 2secs off constantly, cleaned filters and then defeated the mech lock on door poured kettle of hot water into filters and emptied fine just a little run on time from pump but nothing really, fault code still flashing, cheers in advance Andy.
Hi Sleepyhead, was wondering if you could help me. I have a problem with a Smeg DWI612c; the error code is not in the book. Lights 1, 2 & 3 are lit and 5 is flashing. Will resetting work in this instance, or do I need to call out an engineer?
Thanks in advance and thanks for the resetting info on a previous forum, but would be very appreciative for more help.
Hi Sleepyhead, I saw a post some time ago where you appeared to have fault codes for an Indesit WIXXL146 washing machine, unfortunately either of the codes you gave at that time apply to my present circumstsnces.
I used to be a TV tech, my WIXXL146 has just stopped working with lights 1 (delay) and 2 (mini load) flashing. I am hoping you can shine some light on the possible cause.
Thanks in advance and thanks for taking time to post on forums to help others.
Hi wondered if you could help, We have a hoover CA230 1300 washing machine. It has stopped spinning at the end of the wash! the drum rotates it carries out all other functions except fast drum spin. Any ideas or things i could try.
Hello Sleepyhead! This is my first time on this forum, so I hope you won't think it too cheeky of me to ask you for a bit of advice directly, as you seem to be the expert! It would be much appreciated as I'm under a wife-induced deadline to fix a broken dishwasher quickly or buy a new one. I've posted this in the appliance forum.... Hello - I would be very grateful for advice on a problem with my Bosch dishwasher, model SPS2462GB/19. It fills and drains ok, but no water is coming out of the 2 rotating arms and the water in the bottom of the dishwasher is not being heated up. The timer seems to be operating in as much as it turns around at the normal rate (as far as I can tell), and the machine fills and drains at various points. The detergent block gets released from the holder. This was a sudden failure. I am not averse to taking the machine to bits to try and fix it, there's not much to lose at this stage, given its age - the machine is 10 years old. Many thanks!
hi sleepyhead, i hope you can help me i have a diplomat adp 8322 when i shut the door to start it, all i get is 6 flashes inbetween pauses and lots of beeping! any help would be much appriciated. thanks. nobbyv@manx.net
Hi Sleepyhead! :o) I'm new to this, you seem to be the person in the know, I was hoping you could help me please, I'm no washing machine expert at all, I have a Indesit WM12x, When you select a program & press start you can hear the watter going in & filling up as it should, but when its meant to spin you can hear a click like it should engage but it doesn't spin at all, on any setting, even on the spin only one. Any ideas? Your advise is greatly appriciated. Regards Howie1000
I have a same problem with Smeg diswasher - I have tried the reset process and once I get to the two fashing lights ie 1 and 5 and I press the programme button, number 1 becomes solid and 5 continues to flash regardless of whether I turn on off for 20secs - do you think the PCB is faulted? Thank you
« Last Page | showing comments 1-10 of 28 |
Next Page »
Back to Sleepyhead's Profile
