|
|
|
|
|
|||
PLEASE NOTE
When replacing a boiler it is imperative that the system is properly flushed out and is installed by a professional Corgi fitter.
If you are thinking of fitting your own boiler then please read THIS
The quality of the installation determines in many cases how reliable the boiler will be, so you should not cut any corners with the installation process!
Equally important is that the system is protected by a good quality inhibitor such as Sentinel or Fernox. The inhibitor strength should be checked annually, and redosed every 3-4 years.
It is considered good practice to have the boiler serviced annually too.
These recommendations are the personal views of our members who are all Corgi Registered fitters. Opinions are highly contentious!
Comments can be found HERE.
TOP RATED
*Alpha *Atag Q * Broag * Buderus 600 * Geminox THI *Valliant Sine*
*Vaillant 600 / 800 series * Vokera Unica * Viessmann Vitodens 200
* Worcester Bosch RI *Worcester Greenstar *
DECENT BOILERS
* Atmos * Baxi / Potterton * Biasi * Ethos *Ferrolli Optimax
* Rotex * Valliant Ecotec * *Valliant Turbomax
*Vokera Compact * Vokera Excel * Wolf * Worcester Bosch
TROUBLESOME *
*Ariston * Baxi 105 HE *Glowworm * Halstead * Heatline* Ideal *
* Keston * Ravenheat * Vokera Linea
* Problems can be down to bad installation !
|
|
By using this site you agree to our Terms of Service / Disclaimer. Please read our Privacy Policy. Copyright © 2000-2008 DIYnot Limited. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of DIYnot Limited is prohibited. |
