Albums for user: GuinnessSI
Check out all albums created by GuinnessSI
How did you make the door?
Looks like you could get some grips on the screw head to get it out?
You would screw a piece of 10mm ply to the top of the thermalites before plastering commenced, or deal with it later and patch up the gap in the plaster below the sill that adding the ply and sill...
Id also probably just combine the cold feed and vent and take a 22mm pipe into the bottom of the tank. This prevents pumping over etc. But bare in mind, this can only be done if the boiler has an...
It use to be 150mm between vent and cold feed
- Uploaded Media:
- Embedded Media:
- Disk Usage:
- 5.7 GB