Recent content by NewhouseOldhouse

Will give that a go

No don't have

Hi I am hoping to put a moulding around my stairs. How do I work out the angles highlighted in the picture? Thanks

That's the model:

checked the pressure its at 1.2 bar all good its the Grant Vortex external 26/36 boiler if i can remember

Hi I have a Grant Vortex Oil boiler which is only 2 years old. This morning the boiler didn't heat the water or radiators and still have 3/4 full tank of oil. I looked at the boiler and the red reset button was not lit but i remembered the installer saying about the Overheat Reset button so i...

Hi What is the highlighted part on the door in the picture called and where can I order it please? Thanks

Will try this

Probably only replacing the glass with the k glass with warm edge bar will resolve this. Not really just bit of condensation, althought when I turn the dehumidifier on readings can be 90% but very quickly goes back down to 50%. What percentage is recommended the house to be at?

Hi All I have a 25 ltr low energy dehumidifier which I run 5 hrs from midnight to 5 in the morning. It is in a central location of a 5 bed bungalow and still get a bit of condensation on some of the windows. In people experience whats the best way to run a dehumidifier? The max wattage is...

Mouldings are good as I have used there before just not sure what the board was called thanks for the name.

Hi Would anyone know what the name of this green board is in the picture? Want do to this on my stairs. Thanks

Can these be wired to mains Murdocchat?

They are both about 2ft long see pictures of wiring Plus SFK Screwfix link doesn't work

I have surplus sockets on the wall under cabinets but wanted to have the mains wired as I already have 2 of the florescent tube one in place. Thanks and might be an idea if can't get mains wired first.