Recent content by fly

Found the following from an earlier post:- Randall 4033 1 L 2 ch on 3 ch off 4 hw on 5 hw off 6 L (link to 1) 7 N 8 E current wiring to Randall unit is as follows: One main query, one cable connects to pins 6, 7, 8 therefore supply cable. Another cable connects to 2, 4...

Hiya The wiring for the tempus is fine, its the Randall 4033 I need the diagram for to do the conversion. Thanks

Hi Currently our CH and HW is controlled by a Randall 4033 unit. I have recently ordered a Drayton Tempus 7 as a replacement. Does anyone know where I can find a wiring diagram so I can carry out the replacement? many thanks......

Thanks for the reply. The timer knob doesn't seem any stiffer to turn.....it was about a year ago, but has been fine since. I ran a speed wash last night without a load and the control unit was clicking before the rinse cycle started, but I think would have continued with program (I did move...

Hi I have a Hoover AM120 and the program timer sticks and repeats 'clicking' just before the rinse cycle on all programs. Turning the control knob on by 1 click alleviates the problem for a minute or so then it continues to stick - there aren't many clicks between the rinse cycle and the final...

Thanks for the reply. When we moved into the property <1yr, all the silicone seals were replaced. I've checked them again but seem ok. I also ran the shower for 20 - 30 mins with no-one in the shower and it seemed ok. As soon as there's someone in the shower drip, drip!! The shower tray is...

whenever we use the ensuite shower we have water coming through downstairs.... I have checked two things: 1. waste - I have poured water into the shower tray and no water appears to be coming through downstairs. 2. supply - I have turned the shower on but blocked the water from exiting the...