Recent content by galwag

The GC No doesn't seem to relate to an Ideal boiler It is probably a Ideal Concord wrs440 Anyway a common fault on this is a dislodged/loose electrical plug that pushes into the back or side of control box that houses boiler stat simple diy fix if it is this or RGI if its not

For a temporary repair but no guarantee you could: Drain down & then add Sentinel or Fernox leak sealer to F&E tank. Refill & vent.Turn off isolating stopcock to F&E and leave turned off Check level of water in tank frequently if the level maintains then you're good for temporary fix but...

I think somehere between £55 - £65 Anyone charging £30 or doing it on their way home are in my view looking to get in & out of house quick as poss. summary of work needed 1. locate & check emergency contol valve 2. check for earth bonding 3. locate and turn off pilot lights to...

from memory i believe the 16-22 version has a resetable overheat stat located on the front or the underside of the control panel. look for a small protruding button with a + shape on the end of it

required part is fan seal glow worm part number 801689

water valve to this boiler has a built in differential valve from memory it is plastic with a small spring attached and goes into inlet side of valve if this is missing damaged or reassembled incorrectly then water valve will not activate microswitches

It is to do with corgi though as i found out this week. we have been notifying corgi since april 1st this year corgi guy carried out random check on one of our installations this week, and although he found no faults gas safety wise, he rang me from site to say our engineer had missed...

type of system or controls wont really have any relevance to pilot outage on this boiler this is a very basic 25 year + old boiler with no overheat cut off devices or suchlike. probably needs a good service + pilot assy / injector cleaned out i would also change thermocouple for good...

unplug & check 11 pin relay contacts may be worn\burnt about 18 quid + vat to buy replacement or cheaper at rs components

have seen pumps fitted under baths

if DP's suggestion still gives no joy I would look at the pressure differential valve aka pump proving switch one of the two small supply pipes to this may be partialy blocked or airlocked You could pressurize boiler to 2 bar to see if that clears it. You will need to reset pressure to...

try http://www.partscenter.co.uk/hrpc/default.html search for hsa3

Thanks breezer I should have guessed you would come up with the answer. I think I was trying to be to specific in the search by entering model details only. Thanks again

Hi all can anybody help out with a set of users instructions for a Bosch WFF 2000 washing machine I have searched this site and tried bosch's website to no avail regards

heating did you renew the o rings or just refit the existing ? If you refitted existing than you will have to remove them & fit new O ring kit Baxi part No. 241568 If it still leaks replace manifold plate 241163