1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Stivino's Recent Activity

  1. Stivino replied to the thread Picking up materials during lockdown.

    It's the best news app around, imho.

    30 Mar 2020 at 12:39 PM
  2. Stivino replied to the thread Pole Saw.

    A telescopic tree pruner would be my saw of choice.

    30 Mar 2020 at 9:03 AM
  3. Stivino replied to the thread Bar shower offset connectors.

    Try googling reducing nipple. You could also use a reducing bush and a straight nipple.

    29 Mar 2020 at 8:15 PM
  4. Stivino replied to the thread tiling wall same size as tile.

    If you have enough, could you cut them to 313 and use two to a row putting the cut edges to the walls?

    29 Mar 2020 at 5:10 PM
  5. Stivino replied to the thread How long does wine keep, unopened?.

    Correct, that is why wine is stored on its side, to keep the cork wet.

    25 Mar 2020 at 7:06 PM
  6. Stivino replied to the thread Locating a particular threaded die.

    That would be my option too. It might not even be necessary to cut the eye off.

    25 Mar 2020 at 12:22 PM
  7. Stivino replied to the thread Latch needed for wrought-iron gate.

    Just put the bolt through the two holes (one hole in each bar) you could put a nut on the bolt just to be sure. I meant an ordinary...

    24 Mar 2020
  8. Stivino replied to the thread Latch needed for wrought-iron gate.

    What about one of these? or a carabinier? Or, drill through the flats of each gate and put a bolt through.

    24 Mar 2020
  9. Stivino replied to the thread Ford Ka+ spark plug equivelents?.

    Exactly. But, that doesn't stop some people doing it, I've even seen people taking them out with air guns; Minis and the like. In the...

    24 Mar 2020
  10. Stivino replied to the thread Avensis ashtray removal, how to?.

    At the bottom of the gear lever, at the back, the part nearest the handbrake, just put your fingers in the the shroud and prise up the...

    24 Mar 2020