Ideal Classic RS 250 Not Working

Sponsored Links
if it has a perm pilot (not electronic ignition) it could be over heat stat tripped (think its on rh side but need to remove bottom panel to get to it red button)

No red button that I can see
 
have you pulled the bottom case off? if so on the right hand side under the boiler you will see a red/orange button push it. if it doesnt move and you hear no click move on call a gas safe man, does the fan run
 
have you pulled the bottom case off? if so on the right hand side under the boiler you will see a red/orange button push it. if it doesnt move and you hear no click move on call a gas safe man, does the fan run

no fan, its a balanced flu
 
Sponsored Links
Has the electric supply been checked for mains power getting to the boiler?
 
have you got a frost stat fitted? one shut the boiler off before when it died
 
Them boards are quite easy to work on with the way voltages go to diff components
 
have you got a frost stat fitted? one shut the boiler off before when it died

Yes, can this be reset or bypassed to see if it is that??

Disconnected the frost stat and tried it again, still no gas and cant find any reset buttons or switches. I have power into the gas valve and pilot light is on, is it safe to assume its a dodgy gas valve?.......
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top