FITTING NEW RADIATOR 10MM CENTRAL HEATING SYSTEM

E

ellsie

Joined
15 Mar 2010
Messages
22
Reaction score
0
Location
Derby
Country
United Kingdom
HI ,I NEED TO FIT A NEW RADIATOR TO MY CENTRAL HEATING, IT AS EITHER 8MM OR 10MM COPPER PIPE AND BOTH FEED AND RETURN CONNECT TO ONE END OF THE RADIATOR- FITTED AROUND 1983,I WANT TO FIT A NEW RADIATOR WITH A TRV ,FEED IN ONE END RETURN IN THE OTHER END,IT IS FITTED WITH A WORCESTER BOSCH 35CDi COMBI.
THANKS ELLSIE.
 
Sponsored Links
HI,WHAT PARTS DO I NEED AND HOW DO I GO ABOUT IT ,ELLSIE
 
measure the diameter of pipe,order approprite fittings and pipe....i.e 8mm pipe ull want 8mm compression fittings and 8mm pipe-or soldered fittings if u can solder,fit rad and repipe to the other end
 
Sponsored Links
So you planning to run 2 radiators off this (possibly) 8mm supply installed around 1983?
 
HI, THANKS FOR ALL YOUR HELP,ALL I AM TRYING TO DO IS REPLACE AN OLD RADIATOR ON A 10MM SYSTEM -WHERE BOTH INLET AND OUTLET PIPES RUN INTO ONE END OF THE RADIATOR,FOR A NEW ONE, SO I CAN FIT A TRV AND HAVE INLET IN ONE END AND OUTLET IN THE OTHER ,A TRV CANNOT BE FITTED WHEN BOTH PIPES RUN TO THE SAME END.ELLSIE
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

B
Going up from 8 to 10mm to radiator.
2
Replies
23
Views
2K
peterperfection
peterperfection
S
Fitting new radiator
Replies
8
Views
746
Shottsguy22
S
J
Installing a radiator from scratch
Replies
1
Views
403
kevplumb
kevplumb
W
Installing TRV's on 10mm microbore
Replies
14
Views
9K
Wildeman
W
J
Trying to fit Danfoss RAS-C2 TRV's to 10mm Pipe work.
Replies
4
Views
11K
jed_123
J
Back
Top