baxi solo with 1 bar pump

A

andy21275

Joined

29 May 2010

Messages

45

Reaction score

0

Location

Coventry

Country

• 15 Jun 2010

• #1

hi all, i have a baxi solo boiler at the moment and i want to install a new mixer shower valve and basin mixer tap in my bathroom. The taps i want recommend 1 bar pressure, and i am sure gravity feed is only 0.1bar. Can i install a 1 bar pump to my hot supply only that will work with this boiler without upgrading anything on the boiler. The cold feed is plenty powerful enough.
Any comments much appreciated
cheers
andy

 

seco services

Joined

3 Dec 2007

Messages

15,712

Reaction score

1,338

Location

Essex

Country

• 15 Jun 2010

• #2

the boilers got nothing to do with it the pump is supplied water from the cylinder.

 

A

andy21275

Joined

29 May 2010

Messages

45

Reaction score

0

Location

Coventry

Country

• 16 Jun 2010

• #3

so from what your saying, there should be no problems installing the pump. The hot water tank is a 50litre tank i think, standard size found in most houses
cheers

 

A

andy21275

Joined

29 May 2010

Messages

45

Reaction score

0

Location

Coventry

Country

• 16 Jun 2010

• #4

another quick question, will a 1 bar shower pump be ok to feed all the hot water outlets in the house, i.e kitchen sink, bathroom taps or do i need to run a dedicated pipe straight to the over bath shower/mixer tap. I much doubt all will be used at the same time anyway.
cheers
andy