Workin Pressure at appliance too low??

S

ScootC

Joined
22 Nov 2010
Messages
6
Reaction score
0
Location
Glasgow
Country
United Kingdom
Just looking for a wee bit of direction on where to go with this.
Installed a new 4 kw gas fire. Gas supply comes into property in 22mm drops to 15mm for around 2m then the last 1100mm is in 8mm with 3 formed bends around the chimney breast and into fire.
Min working pressure at appiance is 17.05mb, however I am acheiving 16.5mb.
Suggestions have been to take form bends out of equation by fitting a pedestal and 8mm rod straight to fire, however customer wasnt keen on the ped protruding out the floor.
Any advice would be greatly appreciated thanks.
 
Sponsored Links
What do you have at the meter test point when the fire is running?
 
Sponsored Links
You should be in the Combustion Chamber for registered gas installers.No DIY gas advice on the public forum.All you need to do is join IF you have a valid gassafe number.Simond you should know better. :!:
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.

Similar threads

S
Low pressure
Replies
2
Views
461
Spooked
S
T
Boiler Gas Pressure Question
Replies
14
Views
2K
Agile
Agile
D
CH Pump vapour lock and noise issues
Replies
4
Views
7K
simond
simond
Back
Top