pipes from thermal store

hi i have now fitted gasification boiler in out building with thermal store
with pipes running back to house and i am wondering what is the best way to plumb them in to the radiator circut

I have a neturlizer fitted in the loft which has the wood stove & oil boiler connected also runs to hot water tank as well so all the ports are in use

I was wondering if there would be a problem with tee-ing the thermal store pipes in to the oil boiler pipes just before they enter the neutrilizer as they are sitting on a 10* angle
do i need any fancy none return valve to do this
any advise welcome

(unless its from agile as i have found his reply some times worthless)

i have absolutly no idea what you are talking about

mrcabrach said:

(unless its from agile as i have found his reply some times worthless)

Click to expand...

Do you mean you didn't understand him when he gave you the benefit of his experience and qualifications for free?

I know what you're talking about but I won't offer any suggestions in case I get some of your ill-mannered arrogance for my pains.

Onetap said:

mrcabrach said:

(unless its from agile as i have found his reply some times worthless)

Click to expand...

Do you mean you didn't understand him when he gave you the benefit of his experience and qualifications for free?

I know what you're talking about but I won't offer any suggestions in case I get some of your ill-mannered arrogance for my pains.

Click to expand...

i see kick 1 backside for a reasonable reason & end up kicking 2
are you a planning official too ?

CBF said:

i have absolutly no idea what you are talking about

Click to expand...

That`s not a reasonable reason to give a reasoned reply . Shame on you all