Looking to change O rings/diverter valve on my Potterton Performa 24 - anyone got a link to info on how best to do this (I haven't done it before, so would appreciate a step-by-step)? Also, best places to get the parts from? Thanks.
Changing diverter valve/O rings: help needed
- Thread starter Dazza001
- Start date
Sponsored Links
A Wolsley parts center are quite good. If you are close to Croydon then Curzons or Shoreheat are a god bet.
Tried your MI for the replacement of the O-Rings
Tried your MI for the replacement of the O-Rings
It's a high-pitched screeching noise that often comes on when the CH is running and a hot tap is then turned on. Turning off the CH for a while is the only way to stop it.
I posted a week or two back regarding trying some X200 in the boiler, but someone reckoned a faulty diverter valve was more likely...
I posted a week or two back regarding trying some X200 in the boiler, but someone reckoned a faulty diverter valve was more likely...
Sponsored Links
If you use this link you'll be able to see the service manual. I should point out (a) that you need to be competent, in the eyes of the law, in order to undertake what you're planning to do, and (b) I'm not advocating that you do the work.Dazza001 said:
Rather than create a new topic, it would have been clearer if you'd continued the original one, because, well, because it's the same problem.Dazza001 said:
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
