Ford Focus pre-tensioners

J

Jim

Joined

8 Feb 2003

Messages

164

Reaction score

1

Country

• 2 Jan 2006

• #1

I have a permanent warning light that suggests the pre-tensioners (for airbag/seat belts) have a problem. Anybody had this problem please and can it be solved by DIY person.
Jim

 

L

laldog

Joined

1 Jan 2006

Messages

12

Reaction score

0

Location

Northumberland

Country

• 2 Jan 2006

• #2

firstly do not mess around with the airbag system with test lights or testers on any of the electrics you will get a big surprise.
Leave the ignition off for at least 2 mins.Look under the seats for a yellow plug.if the plug has not come apart,unplugg them and reconnect them.if this does not cure the fault get it code read to point you in the right direction.There is a softwre issue on some of these and you may find a dealer will do an upgrade.

 

M

marka356

Joined

29 Nov 2005

Messages

17

Reaction score

4

Location

Suffolk

Country

• 3 Jan 2006

• #3

hi jim does the lamp stay on all the time or does it flash a code.i.e 4 quick flashes and 2 slow flashes would be 42.

 

J

Jim

Joined

8 Feb 2003

Messages

164

Reaction score

1

Country

• 5 Jan 2006

• #4

The light stays on all the time. Does that give a clue.
Thanks
Jim

 

M

marka356

Joined

29 Nov 2005

Messages

17

Reaction score

4

Location

Suffolk

Country

• 9 Jan 2006

• #5

im assuming its a focus.anyway if the light is on constantly it could be a fuse these are behind the glove box but it sounds more like the control module.this is under the center consol and would prob be best fitted by ford garage as they have to be programmed on computor

 

J

Jim

Joined

8 Feb 2003

Messages

164

Reaction score

1

Country

• 12 Jan 2006

• #6

Thanks for advice. Will take it to the Ford people.
Jim