Sarigas Sintex

P

Peppermint Tea

Joined
16 Nov 2007
Messages
3
Reaction score
0
Location
London
Country
United Kingdom
Hi all
I have a Sarigas Sintex combiboiler. If I'd known it was Bulgarian I would probably have resisted the "professional" who recommended it and installed it. Anyway the printed circuit board has gone and I haven't got a clue how to get a replacement. if there's anyone out there who's had the same problem or just can help then please let me know.
I'm desperate!
 
Sponsored Links
You could ring or fax Sarigas in Bulgaria on +359 46 66 43 86. The worst that could happen is that there won't be anyone who speaks English to take your call. Part number for the PCB is 00042.

What about your installer? And isn't there a manual for the boiler?
 
Sponsored Links
Tony - I'm pretty sure the PCB has gone by the way it's behaving - i.e. the boiler's fine in terms of producing hot water but cuts out for heating the rads. I got my pal who fits boilers for a living to have a look and he confirmed as much. He's pretty good and I trust him.
 
That could just be a temperature sensor, or a bad switch contact. Hope he tested for that?
 
Most SARIgas Spares are in stock at

ESL Spares
European House
Station Drive
Tewkesbury
Bredon
GL20 7HH

Telephone - 01684 773737 or 01684 773747

To FAX an Order - 01684 773222
 
Most SARIgas Spares are in stock at

ESL Spares
European House
Station Drive
Tewkesbury
Bredon
GL20 7HH

Telephone - 01684 773737 or 01684 773747

To FAX an Order - 01684 773222
 
Calum123 is right.

SARIgas as a boiler manufacturer was based in Verona in Italy, they sold boilers throughout the european boiler market but unfortunately did not survive the economic downturn of a few years ago.

When they went out of business a company called ClimaTeC ( www.sarigas.it ) took responsibilty for supplying the spares for SARIgas boilers.

ESL Spares lists all the available spares for all models of SARIgas boilers that were sold in the UK.

Their website www.eslspares.com has parts lists ( in Italian!!!) and sells all spare parts that are still available.

www.heatingadvice.info
 
Peppermint Tea said:
Tony - I'm pretty sure the PCB has gone by the way it's behaving - i.e. the boiler's fine in terms of producing hot water but cuts out for heating the rads. I got my pal who fits boilers for a living to have a look and he confirmed as much. He's pretty good and I trust him.
Click to expand...
You need someone who's had experience of these boilers and if I was 100 miles nearer I could replace THE PUMP for you ;) ;) ;)
 
holy-thread-revival-batman.jpg
 
There's still Plumbers out there having to fix these crappy boilers, any extra helpful info that goes straight to the real problem is only useful

It's a pain in the ass reading through chinese whispers, change this, swap that, replace the other, have you tried so and so

I posted here because I have to work on these myself and am looking for specific info - not found in this thread I might add - but google pointed me here

By the way, I was in EMS office on friday and spares are like hens teeth or recovered from working boilers!
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

S
Honeywell 3 port resistor wire wound resistor rating
Replies
2
Views
652
scoobydo123
S
J
Saniflo Turbo Flush
Replies
2
Views
1K
John M
J
S
worcester 28i junior - Blinking (wont work)
Replies
14
Views
2K
Terry lambert
Terry lambert
N
Potterton Suprima 30 water working no heating help!
2 3 4
Replies
52
Views
2K
fixitflav
F
N
Skirting Board heating
Replies
0
Views
748
noheating
N
Back
Top