please what is the general fall or formula of a felted roof on an extenstion
the roof i am working on is about 6 meters long
the roof i am working on is about 6 meters long
flat roof slope ?
- Thread starter chippiewood
- Start date
Sponsored Links
yes masona roof size.... 3m wide x 6 m long so the cutter is at the short end
so the cutter will be 3m long,
Sponsored Links
cheers
sorry have posted in wrong thread
will repost elsewhere
will repost elsewhere
1 in 80 should be ok for a roof.
1 in 40 is reserved for foul drains.
1 in 40 is reserved for foul drains.
The correct minimum fall of a flat roof should be 1:60 by design to acheive 1:80 with deflection ie sagging over time but with flat roofs with a gutter and no internal outlets to worry about over whelming the greater the fall the better. 6m/60 = 100mm difference between top and bottom
tar cambridgeroofer...very useful information
1:60 1:40
Could someone please tell me what this actually means ?
What is the 1 and what is the 40 or 60 ?
Could someone please tell me what this actually means ?
What is the 1 and what is the 40 or 60 ?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
