Honeywell ADE Reson 8 bell box - connection help required

jblaco · 31 Jul 2013

I have purchased a new Honeywell ADE Reson 8 bell box which excluding the battery has five terminals:-
Stb -
Trig -
Hold off -
Hold off +
Rtn -

How should it be connected to the existing control panel using the available four wires ?
Notation on control panel is :-
SA bell hold off -ve
SA bell anti-tamper -ve
Bell power -ve feed
Bell hold off supply

oasistechnical · 31 Jul 2013

stb - ve strobe trigger, link to bell trigger if yu only have 4 core cable

trig - ve = bell power -ve (bell trigger)
hold off - ve = SA hold off - ve (bell hold supply negative)
hold off + ve = bell hold off supply + ve (bell hold off positive)
rtn -ve = SA bell anti tamper - ve (tamper return)

Oasis

jblaco · 31 Jul 2013

oasistechnical said:
stb - ve strobe trigger, link to bell trigger if yu only have 4 core cable

trig - ve = bell power -ve (bell trigger)
hold off - ve = SA hold off - ve (bell hold supply negative)
hold off + ve = bell hold off supply + ve (bell hold off positive)
rtn -ve = SA bell anti tamper - ve (tamper return)

Oasis

Oasis. Thanks for your prompt response

Please confirm if I have got this connection plan correct.

Stb - = Fix an extra lead from this terminal to Trig- terminal
Trig - = Bell power -ve feed
Hold off - = SA bell hold off -ve
Hold off + = Bell hold off supply
Rtn - = SA bell anti tamper - ve

oasistechnical · 1 Aug 2013

yep thats right, unless your cable to the eternal siren has 6 cores then use the strobe connection using another one of the spare cores.

Oasis

jblaco · 3 Aug 2013

Thanks for the confirmation and have wired as you said. The supply cable from the control panel has only 4 cores red, black, blue and yellow.
Next thing is to activate the system and I hope you can on advise the appropriate connection sequence.
1. Control panel mains supply on / off
2. Control panel battery - and + terminals in
3. Control panel switch on / off
4. Bell box battery on / off pin terminal.
5. Bell box timer settings :-
J6 test
J5 20 minutes
J4 10 minutes
J3 5 minutes

Also what should I expect to hear if all is well

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Honeywell ADE Reson 8 bell box - connection help required

jblaco

oasistechnical

jblaco

oasistechnical

jblaco

DIYnot Local

Similar threads