Trying to install my shower valve in the airing cupboard behind the shower.
Basically the spindle with the toothed gear on the end that the handle locks into does not reach far enough due to the thickness of my wall.
the shower valve is fixed to a sheet of ply that is plaster boarded and then tiled with natural stone which makes it too thick. about 40-50mm. I therefore need to extend the toothed spindle somehow. Is this possible. See pic of what I am referring to attached.
Basically the spindle with the toothed gear on the end that the handle locks into does not reach far enough due to the thickness of my wall.
the shower valve is fixed to a sheet of ply that is plaster boarded and then tiled with natural stone which makes it too thick. about 40-50mm. I therefore need to extend the toothed spindle somehow. Is this possible. See pic of what I am referring to attached.