Underfloor heating in my orangery...

It's fairly simple, the more pipe in the floor the lower the mean water temperature. Providing you can achieve the watt/M2 required.
However, in the commercial world of contracting, where time & pipe is money, an accurate design is always done.

100mm pipe centres is not uncommon, however, with most types of PEX pipe you need to 'spoon' the bends.
 
Sponsored Links
You should have told us it was to be on the wall!
 
Sponsored Links
Hehe if you can't tell difference between a wall and floor I wouldnt trust you installing a outside tap at my house
 
It must be 25 years since I worked on a job where the guys were not wearing PPE. I hope you've got wee Dom's mobby number handy???

.
you never been to Sussex then , Mettey ;)

Only been there planing tank routes for the forthcoming invasion of the Jocks!! Engerland is one of the most invaded countries in Western Europe!!
 
I used to fit then for £48 but have not been asked to do one for some while.

Not sure where my stock of the outlets with tube fitted have gone to either!

Think I would want a bit more now!
 
I used to fit then for £48 but have not been asked to do one for some while.

Not sure where my stock of the outlets with tube fitted have gone to either!

Think I would want a bit more now!

Just pulling your leg T......... ;)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top