Baxi Boiler 105e Diaphram change - O Ring?

A

AndyJay

Joined

22 Sep 2004

Messages

140

Reaction score

1

Country

• 25 Oct 2014

• #1

Hi All.
Hope i can get a quick answer to this as i have the Diverter off at the moment.
I have a small O' Ring with the repair kit (had a small leak), but i don't know where it should go.
There wasn't one when i took the front of the diverter off to repair.
Where does it go??

Many thanks
Andy

 

A

AndyJay

Joined

22 Sep 2004

Messages

140

Reaction score

1

Country

• 25 Oct 2014

• #2

It's ok

I figured if it didn't have one when i took it off, then it doesn't need one putting it back together.
Maybe it fits behind the main assembly!

Thanks
Andy

 

Agile

Joined

26 Jun 2004

Messages

64,615

Reaction score

4,774

Location

London

Country

• 25 Oct 2014

• #3

It can go in the back part but if its not leaking then you don't need to bother!

Tony

 

G

gas112

Joined

27 Oct 2009

Messages

30,869

Reaction score

14,918

Country

• 25 Oct 2014

• #4

When you take the front gland nut off it goes on the pin then put nut back on . Its a belt and braces approach from manufacturers due to the amount that weep after a few years due to minute wear on the pin and gland nut.