Nice one, cheers for your time tonight - appreciate it!
Baxi Bermuda backboiler - central heating iffy after water
- Thread starter Fitzchiv
- Start date
Sponsored Links
take the head off the heating valve and shake it.if it rattles the valve knacked
cheers Mick, alright to take the head off without bleeding the system?
Just a note on jamming it open, seems like the system will just keep heating water and chucking it round the rads whilst it's jammed open - so although it's a way of getting heat into the radiators it's not something you could leave to its own devices
Just a note on jamming it open, seems like the system will just keep heating water and chucking it round the rads whilst it's jammed open - so although it's a way of getting heat into the radiators it's not something you could leave to its own devices
Sponsored Links
I'm not 100% without looking the number up but I think yours is too old. If it doesn't pop off when you press a button on the side, no, you can't swap the whole head. You can change the motor .
.
It's just till you fix it.
AS I said, the CH programmer and CH thermostat won't do anything.
If you just leave the CH valve open on the lever where it's not far enough for it to turn the boiler on, then the HW switch will make the rads warm and not, cos the CH valve's open.
Quite - otherwise there wouldn't be any point having one which worked properly
.It's just till you fix it.
AS I said, the CH programmer and CH thermostat won't do anything.
If you just leave the CH valve open on the lever where it's not far enough for it to turn the boiler on, then the HW switch will make the rads warm and not, cos the CH valve's open.
Check the jumper on the back of the lp112 is on p also.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
