Who makes a 24 way sp board.
Possibly a 3ph board with a single phase kit fitted at the main switch
Possibly a 3ph board with a single phase kit fitted at the main switch
24WAYS -3 DAYS
- Thread starter deadshort
- Start date
Sponsored Links
Eaton make 28 and 36 way SP isolator boards (dual rail) and 24 and 36 way dual RCD boards.
http://www.eaton.com/ecm/groups/public/@pub/@eaton/@mem/documents/content/ct_232832.pdf
none of them are cheap though
http://www.eaton.com/ecm/groups/public/@pub/@eaton/@mem/documents/content/ct_232832.pdf
none of them are cheap though
Sponsored Links
Schneider do a SP dist board with 27 outgoing ways.
http://www.theelectricalwarehouse.c...phase-distribution-board-without-incomer-125a
http://www.theelectricalwarehouse.c...phase-distribution-board-without-incomer-125a
Was it just the board or were there any remedials (bonding etc)?
What hours did they work per day?
Were all of the circuits tested before and then all of the RCBOs tested afterwards?
Was there straightforward access or was it awkward?
What hours did they work per day?
Were all of the circuits tested before and then all of the RCBOs tested afterwards?
Was there straightforward access or was it awkward?
I have fitted some of the two row Merlin boards, I did wonder when clicking the link.
They use the same photo for every SP board they list.
Tell you what I won't bother posting helpful stuff in future if all that's going to happen is people will delight in picking fault with anything they can
Tell you what I won't bother posting helpful stuff in future if all that's going to happen is people will delight in picking fault with anything they can
To be continued...
(Although not in that configuration - I just loaded it up to see how heavy it got)
Does that mean you're going to stop picking faults with my helpful posts, and you will stop telling people to ignore Wiki articles which tell them what they need to know, and stop telling them to discount the idea that to do electrical work they should know what they are doing?Tell you what I won't bother posting helpful stuff in future if all that's going to happen is people will delight in picking fault with anything they can
If I think your opinion is wrong I will say so as I'm certain you will do.
So you think it is wrong to be of the opinion that people should understand what they are doing when carrying out electrical work? That must mean you think it is right for them to do such work when they are incompetent.
How strange.
And you think it is wrong to provide people with information which will improve their knowledge and competence?
How strange.
How strange.
And you think it is wrong to provide people with information which will improve their knowledge and competence?
How strange.
I think the way you go about trying to beat information into people is the wrong approach, and that they will listen and we can make sure a safe job results by telling people what to do.
1) I do not beat anything into anybody - I help them find the material they need to learn.
2) Simply telling people what to do is what is completely, utterly, fundamentally wrong, wrong, WRONG. And irresponsible, uncaring, dangerous and shameful.
2) Simply telling people what to do is what is completely, utterly, fundamentally wrong, wrong, WRONG. And irresponsible, uncaring, dangerous and shameful.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
