Pyronix Sterling 10 PA problem

mark206000 · 9 May 2015

Hi,

Have the above alarm system. It's been wired to the lighting circuit and I needed do some work so was disabled for about 30 mins.

Now it's showing a bell symbol and chirping occasionally. Also when I set it, as soon as I put the code in the alarm sounds and displays 'personal attack' on the screen.

There is a PA switch in the house, is it push to make or break incase it's gone faulty.

Any ideas ?

Thanks,
Mark

sparkymarka · 9 May 2015

Normally close device, turning off the power should not affect the pa button, how old is the back up battery ?

mark206000 · 9 May 2015

I'll test the switch when I get home. No idea about the battery, alarm was here when we moved in about 4 years ago now. Probably worth replacing by now I'd imagine, I'll get it swopped out over the weekend and check again.

Thanks for the help !

sparkymarka · 9 May 2015

Best bet is open main panel down power system , link out the pa zone and power back up with a new battery , if this is clear re-fit panic alarm and recheck system. 90% of all faults are caused by faulty back up batteries

mark206000 · 9 May 2015

Will do, I'll up date when I get some results !

mark206000 · 15 Jun 2015

Damaged cable, looks like a wee mouse has had it's way with it ! Strange that the power off set it in motion tho.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Pyronix Sterling 10 PA problem

mark206000

sparkymarka

mark206000

sparkymarka

mark206000

mark206000

DIYnot Local

Similar threads