Replacing laminate installed under kitchen units.....

Joined
11 Dec 2015
Messages
30
Reaction score
0
Country
United Kingdom
Hello

I want to replace the laminate in my kitchen (with new laminate of same thickness). Unfortunately the owners before me fitted the laminate before the kitchen, and it goes back to the walls. In my mind I have 3 options:

1. Lay new laminate on top of old laminate, up to the feet of the units and cover with trimmed kickboards.
2. Physically cut-out existing laminate up to the line of the unit feet (using mini-circular saw with depth gauge set to 9mm) and fit new laminate. Kickboards will hide the join.
3. Try and gently raise the units by 1mm (car jack??)/screw-up legs to pull out the existing laminate, and then slide new stuff under.

I know that any none of these are ideal, but I don't want to remove the kitchen units (they're in good nick, and the worktop is perfectly jointed and level). I am aware that the membrane/underlay might be damaged during the process.

Any suggestions as to which is the least cowboy-like option, and likely to give the best result?
Thanks
 
Sponsored Links
If the units have adjustable legs then you could wind them up to take them off the floor, leaving the cabinet supported by its connections to its neighbours.

It'll be easier if the laminate is running perpendicular to the units rather than parallel, as then you'll probably only need to wind up one pair of feet (a front and a back) at a time, slide a strip of laminate under, then move on to the next strip and legs.
 
Thanks. I've got a U-shaped kitchen, so will have some units perpendicular and others parallel.

I think this job will involve lots of frustration and swearing.
 
Sponsored Links
definitely 2 as laminate needs an angle to click in or space to get a hammer and block in to close up
 
save yourself a lot of bother, just lay new ones up to the carcase legs, the kick plate will hide joint behind, and no one would even know they are not running all then way to the wall and besides what difference it would make, none what so ever, not even make your house price go up if you were to sell. Oh yes that s option 2.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top