Water from hot tap takes 30 secs to get hot using water tank

degsy41 · 2 Mar 2017

Hi,

I had a new heating system installed in my flat to replace an archaic gas fired warm air heating system and a gas fired water boiler in my kitchen.
I had it installed in my loft on the gable end with new pipe work and rads. I also had a pressure accumulator fitted due to the mains pressure being a little weak.
The problem I have is that when I put the hot tap on full it takes 30 to 40 seconds for it to start flowing hot water.
Could this be due to the pressure accumulator? based on the pressure it seems the hot tap has a lot more pressure than the cold tap. My logic tells me that pressure accumulator should be assisting the pressure of the cold water as adding cold water to a hot water feed seems illogical. Maybe that is why its takes so long to get to temperature?
Any advice welcome.

thanks,

Degs

omega015 · 2 Mar 2017

What boiler did you have fitted? The installers didn't leave ECO mode on by any chance did they?

endecotp · 2 Mar 2017

30-40 seconds sounds quite quick to me.
I don't think the accumulator is a problem; it's just that you've been used to a system that was relatively quick and the new system fundamentally isn't.
People here will give more useful feedback if you can tell us exactly what boiler you now have.

degsy41 · 2 Mar 2017

I believe it's a valiant ecotec 612

I've never lived in a property where it takes more time than 5 secs for the water to get hot.
But the hot water should come from the unvented water tank shouldn't it?

dilalio · 2 Mar 2017

Which hot tap are you referring to?

degsy41 · 2 Mar 2017

Both
I live in a 1st floor maisonette and the kitchen and bathroom taps are with in 3m of each other.

dilalio · 2 Mar 2017

And... you mention a UV cylinder! You have one of those as well? Where is it in relation to boiler and the tap in question?

Steelmasons · 2 Mar 2017

dilalio said:
And... you mention a UV cylinder! You have one of those as well? Where is it in relation to boiler and the tap in question?

An accumulator is an expansion vessel and not a hot water store.

...612 is a system boiler and not a combi.

dilalio · 2 Mar 2017

Steelmasons said:
An accumulator is an expansion vessel and not a hot water store.

degsy41 said:
But the hot water should come from the unvented water tank shouldn't it?

Steelmasons · 2 Mar 2017

..and????...an accumulator would be fitted to boost the water supply which in turn would supply the unvented cylinder..

I was a little confused when you mentioned the OP having a UV cylinder in conjunction with an accumulator??..how else did you envisage the type of hot water system installed???

dilalio · 2 Mar 2017

Steelmasons said:
..and????...an accumulator would be fitted to boost the water supply which in turn would supply the unvented cylinder..

But the boiler is a combi and my initial query was if there were long pipe runs between either the boiler or the UV, to the tap(s). And if certain taps were fed by the combi with others fed by the UV.

Steelmasons · 2 Mar 2017

The Vaillant 612 is not a combi..

Steelmasons · 2 Mar 2017

Steelmasons said:
...612 is a system boiler and not a combi.

..

dilalio · 2 Mar 2017

Play fair Steel... you edited two of your posts and then quoted the edit!

Let's wait for the Op to come back with more detail eh?

Steelmasons · 2 Mar 2017

dilalio said:
Play fair Steel... you edited two of your posts and then quoted the edit!

I quoted my post just in case you happened to miss that I said it was a combi.

Let's wait for the Op to come back with more detail eh?

I don't need the OP to tell me that a 612 isn't a combi..

I don't require any more detail.

Surely you've repaired/installed/serviced/seen a Vaillant 612 in all the years as a professional plumbing/heating engineer??...or possibly any advise you give on this forum is gleaned from others???

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Water from hot tap takes 30 secs to get hot using water tank

Similar threads