- Joined
- 15 Jun 2016
- Messages
- 21
- Reaction score
- 0
- Country
Hi everyone, hopefully a very simple one but can not get my head around it.
I'm mounting a wall mounted bath spout and separate taps, by Hudson reed.
http://www.homesupply.co.uk/hudson-...ll-mounted-bath-spout-tap-bc309hx=BC309HX.htm
The 3/4" thread on the spout is not long enough to allow a tap connector to be fully inserted and allow for 12mm plasterboard wall - let alone the tiling as well.
Can anyone spot what I'm clearly missing please.
Thanks,
Justin.
I'm mounting a wall mounted bath spout and separate taps, by Hudson reed.
http://www.homesupply.co.uk/hudson-...ll-mounted-bath-spout-tap-bc309hx=BC309HX.htm
The 3/4" thread on the spout is not long enough to allow a tap connector to be fully inserted and allow for 12mm plasterboard wall - let alone the tiling as well.
Can anyone spot what I'm clearly missing please.
Thanks,
Justin.