Stihl MS181 chainsaw stops after about 30sec

Joined
16 Mar 2014
Messages
50
Reaction score
3
Country
United Kingdom
I could do with some help with my Stihl MS181 chainsaw which starts OK, but then stops after about 30secs, regardless of if I leave it to warm up in idle or rev it up as soon as it will take it.

I have cleaned the air filter and checked the fuel filter, both look ok.

I have heard that it might be a blocked spark arrestor but I am not sure how to get at it. I have removed the two spring clips (see picture) from the exhaust, hoping that would allow me to remove the muffler and find the arrestor, but nothing seems to budge.

Am I on the right track

TIA

John

2017-05-31 11.16.30.jpg
 
Sponsored Links
If you want to shift the muffler, prize those daft clips away and you'll find torx screws beneath......no need to use those things anyway!
I'd doubt that this is your problem though - try looking for the fuel tank breather (a conical rubber thing on the top) and blow the crap away with compressed air. If that doesn't help then its a carb stripdown......not too bad but you will need an aerosol of carb cleaner standing by. There is a very fine gauze filter inside the carb which may be blocked.
John :)
 
Any clue where the fuel tank breather is? Nothing obvious that I can see.
 
There are various designs, and they often hide below the carburettor.
Another trick is to run the thing with the fuel cap loose, of course.
John :)
 
Sponsored Links
Make sure you have correct mixture or it will seize after a brief run, which may be problem?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top