Fit toilet seat without instructions

von555 · 30 Jun 2017

Hi.

Looking for advice on fitting this toilet seat. My attempt didnt work. Presumably there's a way all the bits and pieces are supposed to fit together...

Hot&Cold · 30 Jun 2017

screw the threaded rod into the centre tapping on the hinge.it may need relocating to the other tapping it depends on the pan.
courtesy of http://www.diydoctor.org.uk/projects/toilet-seat.htm

Some toilet pan's have different requirements for attaching seats,if yours has seat fixing holes drilled completely through the pan then your ok,
See this

von555 · 30 Jun 2017

Very good. That helps immensely.

Tigercubrider · 30 Jun 2017

they sometimes go a bit loose after a while, or mine have.

I added a dab of locktite to the metal/metal thread and a dab of silicone on the rubber parts to stick everything together (lightly)

Bosswhite · 30 Jun 2017

The fixing bolt can either go in the centre of the fixing or the off centre fixing so one can adjust seat fitting to pan .

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Fit toilet seat without instructions

von555

Hot&Cold

von555

Tigercubrider

Bosswhite

DIYnot Local

Similar threads