150mm flexi tap connector - do they exist?

Joined
12 Dec 2013
Messages
58
Reaction score
0
Location
Lancashire
Country
United Kingdom
IMG_2556.JPG


I have built a shelf for a countertop sink and tap to sit on. All the pipework is exposed. It's all chrome and very neat so looks pretty cool (IMO)....however the taps connectors are 300mm long and (IMO) look a bit crap.

150mm flexible tap connector would be sweet...they'd tuck in nicely under the shelf. However, they don't seem to readily exist. Found a single one on eBay for £15 and £20 delivery!

Can anyone source them? Or think of an alternative?
 
Sponsored Links
Loads of 150mm tap connectors on Amazon. Just not the type I need.

Forgot to mention it's an M10 connection into the taps. So I need M10 to 15mm flexi connector.
 
Sponsored Links
Might be worth considering replacing the flexis with copper M10 x 15mm tap connectors (e.g. https://www.bes.co.uk/copper-monoblock-tap-tails-m10-x-15mm-19800). You could shorten as necessary and get them chrome plated (very expensive, last time I had it done cost was £75), or use chrome pipe trims on the full width 15mm part.

An alternative might be to use chrome plated 22mm tube over the pipework before and after the isolation valves.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top