Trying to replace the timer on a Lamona Oven

I am trying to replace the timer on a Lamona HJA3650 oven (think its a Howdens make). The problem is that to remove the timer you need to remove the stainless steel fascia and I cannot see how its held on. Taking the two rotary knobs off do NOT reveal any screws and I cannot see any screws holding the fascia on. I spent an hour today trying to accomplish this with no success. Has anyone else had this problem and can anyone help shed some light on the issue please?

Thanks

Nigel

So I now have the PDF exploded diagram of the oven and still cant see how to remove the Fascia - can anyone else spot how to do it?

I have done this on a Stoves oven and its not done by removing the facia, I had to remove the top and sides casing and do it from behind. Wasn't that hard to do.

Hope that helps

pixey

Thanks pixey. I had taken the top off to gain access to the timer and I can see by the replacement timer that it pushes in from the front of the panel marked 3403 that I assume the front fascia is somehow attached to. Somehow I will need to gain access to the frame even if the fascia stays put - not sure if that makes sense?