Honeywell Galaxy Flex
- Thread starter Trueone
- Start date
Sponsored Links
I can actually use full set - my second keypad is sited upstairs and the night set seemed to suit because it appeared to silence all those beeps. Maybe there is a way I can achieve this - I notice in menu 58,4 and 5 there is a way of turning off the lights and muting the keypad and maybe I use a fob.
The problem is when my granddaughter stays, she will be in bed when I set the alarm and I don't want to wake her - but want to be woken if there is an alarm.
The problem is when my granddaughter stays, she will be in bed when I set the alarm and I don't want to wake her - but want to be woken if there is an alarm.
Use silent part set. Manual extract below. You can re-program the 'B' key (58.2.2) to perform silent part set (17).
----------------------------------------
Silent Part [17]
Selecting this option sets all zones that have the
part attribute enabled. It starts a normal
timed exit procedure but exit sounders are not activated.
In the event of an alarm occurring
during a Silent Part set (e.g. fire alarm), normal
operation will be re-instated.
When group mode is enabled (option[63.1]),
no other group setting options are affected.
Note:
Zones must be closed to allow the system to silent
set. If any zones are open, then the Exit Time
Reset feature (detailed previously) is activated.
Unsetting results in a double beep.
----------------------------------------
Silent Part [17]
Selecting this option sets all zones that have the
part attribute enabled. It starts a normal
timed exit procedure but exit sounders are not activated.
In the event of an alarm occurring
during a Silent Part set (e.g. fire alarm), normal
operation will be re-instated.
When group mode is enabled (option[63.1]),
no other group setting options are affected.
Note:
Zones must be closed to allow the system to silent
set. If any zones are open, then the Exit Time
Reset feature (detailed previously) is activated.
Unsetting results in a double beep.
Once again galaxyguy, I am in your debt.
Many thanks.
Many thanks.
Sponsored Links
- Joined
- 8 Jan 2017
- Messages
- 28
- Reaction score
- 0
- Country
Issue #2 is a bug in the panel firmware. Honeywell have made significant improvements to handle weak GSM signals which are typically reported as "Fault Line Fail Com5". This fix was introduced in V3.39, release notes enclosed.
Changes between V3.38 and V3.39:
###################################
Flex:
- Support for Flex and Flex+ V3.39 panels
- GSM/GPRS Weak Signal and Weak Signal Delay, GSM Fault Restore
- Weak Signal event
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
