Vertical Radiator brackets - which ones?
- Thread starter Fud_Face
- Start date
Sponsored Links
Dmcg,
I believe they are "Acova column radiators" that are sold at B&Q.
http://www.diy.com/departments/heating-plumbing-cooling/radiators/column-radiators/DIY1652550.cat
Doing a search for "Acova column radiator bracket" brought up this:
https://www.ebay.co.uk/itm/2x-wall-...kets-acova-Bisque-Zehnder-Runta-/192100606040
and this
https://www.ebay.co.uk/itm/X6-Clamp...lumn-Radiators-White-Acova-Type-/162744018004
sfk
I believe they are "Acova column radiators" that are sold at B&Q.
http://www.diy.com/departments/heating-plumbing-cooling/radiators/column-radiators/DIY1652550.cat
Doing a search for "Acova column radiator bracket" brought up this:
https://www.ebay.co.uk/itm/2x-wall-...kets-acova-Bisque-Zehnder-Runta-/192100606040
and this
https://www.ebay.co.uk/itm/X6-Clamp...lumn-Radiators-White-Acova-Type-/162744018004
sfk
Last edited:
Links in this post may contain affiliate links for which DIYnot may be compensated.
Sponsored Links
H
Hot&Cold
No brackets 
Any installation instructions or packaging,looking for a clue.
Do an ebay search for 'vertical designer column radiator cup brackets'
Any installation instructions or packaging,looking for a clue.Do an ebay search for 'vertical designer column radiator cup brackets'
Thanks very much all of you for the replies guys as i was totally lost!
I purchased the Cup brackets before but they were 55mm wide rather than 50mm which i couldn't find but was told to use the clamp type brackets SFK mentioned.
I'm going to have a look in B&Q to see if i can confirm the radiator type.
How many fixings will i require?? as the radiator is a fair weight!
Muggles your ones could be an option if they would fit correctly?
No box, instructions or any branding on the radiator sure makes it a bit more difficult!
I purchased the Cup brackets before but they were 55mm wide rather than 50mm which i couldn't find but was told to use the clamp type brackets SFK mentioned.
I'm going to have a look in B&Q to see if i can confirm the radiator type.
How many fixings will i require?? as the radiator is a fair weight!
Muggles your ones could be an option if they would fit correctly?
No box, instructions or any branding on the radiator sure makes it a bit more difficult!
Dcmg,
Assuming yours is a Aviva radiator, When I do a google search for the following words I see the instructions of how to use the hangers I suggested.
acova instructions
Note that I found the Aviva hangers hard to instal, but have worked well since fitting. There is also a video showing different 'hook' hangers that look easier.
Either way here is link to the acova hangers and how they are installed.
https://www.google.co.uk/url?sa=t&s...7DxQQFghMMAE&usg=AOvVaw1cUIt5Qvpdrx2cEKIa4Ee8
My radiator (2 column tall narrow) came with 4 hangers. The link shows others need 6.
I put them near, but not at, four corners of radiator.
Like all radiators, hard part is ensuring the screws to hold these to wall are secure.
Sfk
Assuming yours is a Aviva radiator, When I do a google search for the following words I see the instructions of how to use the hangers I suggested.
acova instructions
Note that I found the Aviva hangers hard to instal, but have worked well since fitting. There is also a video showing different 'hook' hangers that look easier.
Either way here is link to the acova hangers and how they are installed.
https://www.google.co.uk/url?sa=t&s...7DxQQFghMMAE&usg=AOvVaw1cUIt5Qvpdrx2cEKIa4Ee8
My radiator (2 column tall narrow) came with 4 hangers. The link shows others need 6.
I put them near, but not at, four corners of radiator.
Like all radiators, hard part is ensuring the screws to hold these to wall are secure.
Sfk
Last edited:
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
