Identify This Router Bit?

M

morpheus83uk

Joined
4 Sep 2014
Messages
516
Reaction score
5
Location
Manchester
Country
United Kingdom
Hello,

Happy New Year! :)

Can anyone identify this bit?

My other half really likes it and I cant seem to find it on Trends Website but its in their video. If I know what I am looking for then it would probably narrow this down but I have no idea.

All help is appreciated.

https://www.toolstop.co.uk/trend-set-ss35x1-2tc-router-cutter-starter-set-35-piece-p71034

Its the video a bit further down the page and the bit in question is at 2:57.

Thanks

James
 
Sponsored Links
Thanks I did do that however I cant seem to see the one from the video as it doesn't seem to have the second part of the cutter the ones from the page you have suggested only seem to have the ball type cutter at the top but not the additional straight part which is what is throwing me.
 
Sponsored Links
That's probably why I cant find it then. At least I know what I am looking for now and I may even ask Trend if they have any kicking around to see if I can get my hands on it or if any other manufacturer has them.

Thanks for clearing that up.

James
 
that bit is not even in the set on the page the video is attached to :rolleyes:
 
Thanks @big-all they do look good pricey though but I guess you get what you pay for anyway.

I will keep looking now I know what I am looking for and see if I can find that one or something very similar like you have linked me too.

James
 
Nearest I know of are these Whiteside cutters:

Whiteside 3324 Router Cutter 001_01.jpg


As others have said - they need a 1/2in router, they probably need to be run at reduced rpm and most important of all the router must be fitted in a router table and not run freehand
 
Probably is a whiteside cutter in the video.
Trend have just plucked it from u tube. Silly sillies.
 
Brilliant Thanks all for your help with this I defiantly have enough to find what I need and @JobAndKnock they are very similar indeed.

Thank you all again for your help.

James
 
Try this one on the Trend website - it's the one you're after.
 
Last edited by a moderator:
It may be easier to recognise the profile if it's turned the same way up as it appears in the tool catalogues. The OP's profile "righted":

That Moulding Cutter 001_01.JPG

Trend 92_1X12TC Moulding Cutter 001_01.jpg


(interestingly there appears to be a fault with the washer above the guide bearing - looks like it is marking the edge of the timber) The profile above the bearing on the last example from the OP doesn't correspond, whereas:

Whiteside 3324 Router Cutter 001_01.jpg


Is a lot closer IMHO. Trend (and other manufacturers) change their range from time to time, so it is possible that they have dropped that particular profile. Trend, Whiteside and Amana do seem to share a lot of their designs (or they copy each other? - either way Dimar have been known to supply at least two of those firms in the past - and probably the present as well), so who knows?
 
Last edited by a moderator:
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

M
Router Bit Table
Replies
6
Views
860
morpheus83uk
M
M
Router Bits
2
Replies
16
Views
3K
Diver Fred
D
M
Trim Routers
2 3
Replies
30
Views
5K
morpheus83uk
M
M
Router Table
Replies
3
Views
862
morpheus83uk
M
A
Flush trim router bit with MDF?
Replies
6
Views
3K
Adam09
A
Back
Top