Filling nail holes and missing knots in wood thats to be painted

Joined
21 Feb 2014
Messages
267
Reaction score
12
Location
Lancashire
Country
United Kingdom
Ive just put up a load of tongue and groove style thin wood paneling in a bathroom, that im going to be painting a thick light grey, the grain isn't likely to be seen and nothing is to be stained.

ive pushed each nail below the surface so its not seen and id like to fill in the dinples left and the rest of the imperfections in the wood.

im wondering what's best to use, wood filler? caulk? something else?

I'm going to swing by B & Q on the way home to pick up whatever is recommended.

Thanks
 
Sponsored Links
White filler is fine, but any large missing knots might be better with actual wood filler because it doesn't shrink. But it can be done with white filler (typically you do it once, wait for it to shrink and crack, then go over it again). Caulk is the wrong stuff.
 
Last edited:
Sponsored Links
For wood your best bet is 2-pack wood or car body filler. One part wood filler has a tendency to shrink under the surface whilst plaster or cellulose decorator's fillers have a nasty tendency to crack or get pushed out as the wood moves with changes in the seasons. About the only other fillers worth a shot on timber are the old-fashioned Brummer fillers and, believe it or not, traditional putty - both of these dry really hard and are remarkably tenacious in their holding power
 
what kind of brands are two pack? is that one that has a seperate hardener in it or does it mean something else?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top