Texecom premiere wireless alarm
- Thread starter whyme!
- Start date
Sponsored Links
I don't believe you can turn off the supervision never mind turn it off for a specific device and it certainly isn't advisable to turn it off.
one contact in a van isn't much good, as the tin open vans, so wouldn't see the contact opening?
where is the van parked ??
one contact in a van isn't much good, as the tin open vans, so wouldn't see the contact opening?
where is the van parked ??
Then look at something to monitor access to the drive may be easier and you.
https://www.texe.com/uk/products/series/wireless-peripherals/premier-elite-series/
https://www.texe.com/uk/products/series/wireless-peripherals/premier-series/
https://www.texe.com/uk/products/series/wireless-peripherals/premier-elite-series/
https://www.texe.com/uk/products/series/wireless-peripherals/premier-series/
Sponsored Links
what something like the Premier External TD-W or GJD D-Tect R Detectors, the only problem may be someone coming in who has no intention of breaking into van, cats, dogs, etc. Could one be on a zone then that zone only triggers an internal sounder, so wakes me up but not the neighbours? could put Premier External TD-W
on gate posts then i guess at height above animals, would it work with elite series?
I have a hikvision cctv with line crossing, wonder if i could adapt that so i heard it at night?
on gate posts then i guess at height above animals, would it work with elite series?
I have a hikvision cctv with line crossing, wonder if i could adapt that so i heard it at night?
yes you could do various options, how would you prefer it work?
you can have it on its own area, don't assign that area to the external siren but assign it to internal speakers/ sirens?
you can have it on its own area, don't assign that area to the external siren but assign it to internal speakers/ sirens?
how is it currently wired?
ie panel bell terminals are usually used for the external bell assigning the Area the detector is on to these terminals will mean the external bell will sound if connected.
however an output as bell SAB area would only sound the sounder if connected to that area, if you have a speaker, then you can assign the area to the speaker panel speaker, keypad if keypad speaker etc.
you have to decide how you want it to work and make sure its wired up correctly and then programmed correctly.
ie panel bell terminals are usually used for the external bell assigning the Area the detector is on to these terminals will mean the external bell will sound if connected.
however an output as bell SAB area would only sound the sounder if connected to that area, if you have a speaker, then you can assign the area to the speaker panel speaker, keypad if keypad speaker etc.
you have to decide how you want it to work and make sure its wired up correctly and then programmed correctly.
The keypad speaker look in keypad setup for areas its assigned to, if the area isn't assigned to the keypad it wont sound from it however the user would still be able to arm t from the keypad instantly if area assigned to the use code.
the speaker wired to the panels speaker terminals would fire if its in the same area as that detector, as would a wired sounder if wired to the bell terminals and assigned in bell and strobe.
the wireless sounders areas are assigned in zone setup and the areas can be changed there for each wireless bell.
the speaker wired to the panels speaker terminals would fire if its in the same area as that detector, as would a wired sounder if wired to the bell terminals and assigned in bell and strobe.
the wireless sounders areas are assigned in zone setup and the areas can be changed there for each wireless bell.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
